DIY Valentine! Heart Robot

This cute little Pinterest inspiration came just in time for Valentine's Day! My son loves robots and when we started to make small variations of these he thought they were super cool. He tried to play with the robots but the paper I had used in the beginning was too flimsy and the tape I used just pulled pieces apart. So I had to improvise making a new one with heavy card stock and brad pins. 

Here is how I made this Valentine Heart Robot

***Now depending on how you will use this, or if you are going to let little ones try their hand at making this you may want to skip out on the brad pins and just use tape or glue. Brad pins are tiny so keep out of small hands!***

Pick out some coordinating colors of heavy card stock. For this particular robot I went with pink and green. Fold a paper in half and cut trace out half a heart like so...

and then cut it out.

Then I cut out 4 smaller hearts for the hands and feet, the 2 more small hearts for the top of the antennas. 

Next you want to trace and cut out 4 strips on another piece of card stock for the arms and legs of the robot. Then two more smaller ones for the robots antennas. 

Once you've cut the strips for the arms and legs, you want to start folding them back and forth to make an accordion like effect. (I didn't do this with the antennas, but feel free to change it up!)

Now comes a time to choose if you are going to want to use tape, glue or brad pins. The reason I used brad pins to secure the arms and legs to the robot is to make them moveable. However if you have really small children who will be handling the robot, or are if-y about using small pins stick to tape or glue!

Here is what brad pins look like. 

By the way... have I mentioned brad pins enough in this post yet? 

Brad pins. Brad pins. Brad pins. :)

I poked a hole in the robot in 4 spots where I will attach the arms and legs. Then I cut the arm and leg strips to make a spot for the pins to go through. Next I attached everything. 

I put a piece of tape over the back of the pin, just to ensure it was secure and to make sure my little guy wouldn't poke his finger. 

Front

 Back

I used more brad pins to attach the hands and feet. The antennas and hearts on top were attached with glue and tape. 

Now you should have something that looks like this. 

Here is when you can get creative. You can let your kiddos draw on the face. I cut out eyes and a mouth from paper as my son was too busy snacking on pretzels and didn't feel like drawing at the moment. 

And voila! A cute Valentine Heart Robot!

My little guy played with this for about 30 minutes until he decided he wanted it on the front door. 

This is such a cute little project to do with the kids. They can make miniature ones to give out as Valentines or keep for themselves. 

Enjoy! ~ Miranda