Valentine Cupcakes with a surprise middle!

I absolutely love Valentine's Day. My thought has always been that on Valentine's Day, the homemade gifts and treats are much more meaningful. These little cupcakes are filled with a surprise middle and a marshmallow heart on top. Here is how I made these...

What you'll need:
2 boxes of cake mix and ingredients to make (two colors, or both white)
Food coloring
Marshmallow hearts (or other topper of your choice)
Cupcake liners
Toothpick
Frosting
Very small heart shaped cookie cutter

So I started out by cooking a box of strawberry cake mix in a regular square cake pan. Allowed it to cool and then using a small cookie cutter, cut out some hearts.

Now depending on how much your cake rose, you may need to cut these little hearts in half and make 2 out of one cut.

Next I prepared a batch of vanilla cake mix. I put some cupcake liners in my cupcake pan and dolloped a little bit of the vanilla cake mix in the middle of each liner. Then I took one of my strawberry hearts and placed it in the batter. Then I carefully spooned more of the vanilla batter over the top and around the sides. You want to be sure that the batter doesn't knock your heart over or out of place.

**IMPORTANT**

As you are placing in the hearts make sure they are all turned in the same direction. You will need to mark the batter in some way in the direction the heart is, so when people bite in the heart is facing them. I used a little red food coloring and dipped a toothpick in and put a dot facing the direction of the hearts.

I thought I would add that this was supposed to be a trail run and I was going to make a better version of this to post this week. But my son has come down with the horrible sickies and I don't think I'll be doing anymore baking this week. I should have pushed the hearts down more into the batter and covered them better. You'll see why in a moment. 

Now bake according to the box directions.

In the mean time get your frosting prepared. I used cream cheese  and tinted it with red food coloring. I don't have any of those fancy pastry bags, ziplock has been my friend when decorating cakes, cookies and cupcakes. One of the best tricks I've learned when putting frosting into a ziplock bag is to but the bag into a small cup then put the batter in. So much easier! Then just cut a little corner off the bottom for your frosting to come out of.

When your cupcakes are done cooking let them cool completely. Now before frosting, make sure you place the cupcake in front of you with the little red dot facing you.

Now frost away, and please be more creative than I was! I topped with a heart marshmallow facing in the direction the red dot was so people knew to bite into the cupcake that way. 

Here is the finished product.

Another with a pink marshmallow on top...

Now cut open to find the heart inside. And getting back to my note on needing to push the heart down better before baking, as you can see the very top of my heart was not showing well on this one. It came out good in some of the cupcakes, but I didn't want to cut open them all open at the same time.

This is great way to get different shapes inside a cupcake. If there is a cookie cutter small enough, it should work! Also a good idea for all those gender reveal cupcakes going around lately! 

Happy Valentine's Day- Miranda

DIY Valentine Heart Craft for kids! So simple!

I got the inspiration for this versatile Valentine craft from Pinterest, in particular this post. 

http://amazingmae.blogspot.com/2012/02/salt-dough-necklaces.html

What I loved about this idea is that it's easy for kids to do, and add their own style to each little heart. The end result can be a necklace, magnet, paper weight... whatever!

Here is what you'll need:

Start out by making a batch of craft dough, you can use our recipe found here- http://2momsandablog.blogspot.com/2012/06/craft-dough.html

Cookie cutters

A toothpick or skewer

Kid safe paint

After making the dough let the kids help roll it out very thin then use cookie cutters to cut out your hearts. If you want to make necklaces or something you can hang with ribbon make sure to poke a hole in the top of the heart. I used a wooden skewer. 

This part is fun for the kids!

Line your baking sheet with some parchment paper and bake at 300 degrees for about 40 minutes. You'll know they are ready when they are hard and beginning to brown a tiny bit on the top. 

Pull out of the oven and let cool. Then let your kids paint them however they want. 

One batch makes a lot of hearts, so this would be great for something your kids could hand out to their friends or family. 

Enjoy, Happy Valentine's Day!

DIY Valentine! Heart Robot

This cute little Pinterest inspiration came just in time for Valentine's Day! My son loves robots and when we started to make small variations of these he thought they were super cool. He tried to play with the robots but the paper I had used in the beginning was too flimsy and the tape I used just pulled pieces apart. So I had to improvise making a new one with heavy card stock and brad pins. 

Here is how I made this Valentine Heart Robot

***Now depending on how you will use this, or if you are going to let little ones try their hand at making this you may want to skip out on the brad pins and just use tape or glue. Brad pins are tiny so keep out of small hands!***

Pick out some coordinating colors of heavy card stock. For this particular robot I went with pink and green. Fold a paper in half and cut trace out half a heart like so...

and then cut it out.

Then I cut out 4 smaller hearts for the hands and feet, the 2 more small hearts for the top of the antennas. 

Next you want to trace and cut out 4 strips on another piece of card stock for the arms and legs of the robot. Then two more smaller ones for the robots antennas. 

Once you've cut the strips for the arms and legs, you want to start folding them back and forth to make an accordion like effect. (I didn't do this with the antennas, but feel free to change it up!)

Now comes a time to choose if you are going to want to use tape, glue or brad pins. The reason I used brad pins to secure the arms and legs to the robot is to make them moveable. However if you have really small children who will be handling the robot, or are if-y about using small pins stick to tape or glue!

Here is what brad pins look like. 

By the way... have I mentioned brad pins enough in this post yet? 

Brad pins. Brad pins. Brad pins. :)

I poked a hole in the robot in 4 spots where I will attach the arms and legs. Then I cut the arm and leg strips to make a spot for the pins to go through. Next I attached everything. 

I put a piece of tape over the back of the pin, just to ensure it was secure and to make sure my little guy wouldn't poke his finger. 

Front

 Back

I used more brad pins to attach the hands and feet. The antennas and hearts on top were attached with glue and tape. 

Now you should have something that looks like this. 

Here is when you can get creative. You can let your kiddos draw on the face. I cut out eyes and a mouth from paper as my son was too busy snacking on pretzels and didn't feel like drawing at the moment. 

And voila! A cute Valentine Heart Robot!

My little guy played with this for about 30 minutes until he decided he wanted it on the front door. 

This is such a cute little project to do with the kids. They can make miniature ones to give out as Valentines or keep for themselves. 

Enjoy! ~ Miranda